The WP CABLING Professional Category 6a Termination RJ45 Plug offers easy, toolless termination and complies fully with ISO/IEC 11801, TIA/EIA-568-C.2. The UTP version offers a plastic body PC UL94V-0 and UL94V-2 and gold-plated phosphor bronze contact pins. Suitable for cable diameters between 6 and 9.5mm. IDC termination accepts wire gauges from 22 to 26AWG. Termination is a quick and simple three stage process without any special tools, prepare and position the pairs from each cable within the color-coded termination Load Bar, once in place the termination Load Bar is snapped onto the IDC block. It can be re-terminated numerous times.

• Transmission properties: Category 6A
• Area of application: Up to 500 MHz, 10GBase-T
• Norms: ISO/IEC 11801 Ed.2,2:2011-06I, DIN EN 50173-1:2011-09 10GB, IEEE 802.3an
• RJ45 plug, 8P8C
• Suitable for Power over Ethernet (PoE, PoE plus e UPoE)
• Tool-free installation on IDC
• Material: ABS UL 94V-0
• Operation temperature: -40° C to +60 °C
• Mating cycles female: > 750 acc. to ISO/IEC 11801
• Clamp: > 200 acc. to ISO/IEC 11801
• IDC wire size: 22 – 27 AWG solid and stranded conductor